Support
myAVR is designed for quick, everyday control of compatible Denon and Marantz receivers. The interface was intentionally designed to feel more like the front of your AVR than a traditional phone app.
myAVR is an independent third-party app and is not endorsed by, affiliated with, or associated with Denon or Marantz.
Features
The controls are designed around the things you use most often and are arranged to be easy to find without accidentally touching the wrong control.
- Power — The power button is large, easy to find, and intentionally separated from the other controls.
- Volume — The large volume knob is designed to look and behave like a real AVR volume control. Grab it with one finger and move it slowly or quickly, just like a physical knob, for granular volume control. Or use Volume +, Volume −, and Mute when you want a quick change.
- Input — Switch easily between the sources available on your AVR.
- Sound Mode — Explore the sound modes available for your entertainment and choose the one that sounds right to you.
- Quick Selects — Quickly recall the listening setups stored on your AVR, including the input and sound mode associated with each Quick Select. You can also save your current settings as a Quick Select.
- Tuner — Enjoy radio with station tuning and quick access to your saved presets.
- Zone Control — Select the zone you want to control.
- Multiple AVRs — Control multiple receivers and switch between them with a simple swipe left or right.
Glass Panel
The glass panel shows your current setup at a glance. It displays the active Quick Select name—or the selected input when no Quick Select is active—along with the current sound mode. When the input is Tuner, it shows tuner information and controls instead.
Tap the glass panel to open the Quick Select picker, just as you would tap the Quick Select button. The Input and Sound Mode buttons also use the panel to show their available choices.
Input
Tap Input to see the sources available for the selected zone. Scroll to the source you want and select it to switch inputs. The list reflects the inputs available on your AVR.
Press and hold Input to edit your sources. Tap the pencil beside a source to rename it, then tap the checkmark to save. Select Show All to show or hide sources with the eye button.
Sound Mode
In the main zone, tap Sound Mode to see the available sound modes and genre buttons. Select Movie, Music, Game, or Pure to recall the last sound mode used for that genre, or scroll to a sound mode and select it. Available sound modes can change with the input source and audio signal.
Zones 2 and 3 support stereo only, so Sound Mode is disabled while controlling those zones.
Quick Selects
Quick Selects recall settings saved on your AVR, such as an input source and sound mode. Tap Quick Select or the center glass display, scroll to the setup you want, and select it.
Press and hold Quick Select to open the editor. Select a slot and tap Set to store the current settings. To rename it, tap the pencil beside the slot, enter a name, and tap the checkmark.
myAVR loads main-zone Quick Select names from the receiver and saves main-zone name changes there. For Zones 2 and 3, you can name Quick Selects in the app; those names are stored in myAVR.
Tuner
When the input is Tuner, the glass panel shows the current frequency, band, and sound mode. Tap the preset list button in the upper left to choose a saved station. Tap the tuner button in the lower left to choose a band and switch between Seek and Manual tuning. In Seek mode, use the up and down arrows to find the next station in either direction. In Manual mode, use + and − to tune one step at a time.
Press and hold the preset list button to edit your presets. Tap the pencil beside a preset to rename it, then tap the checkmark to save. Select Show All to show or hide presets with the eye button. To replace a preset with the currently tuned station, select it from the list and tap Replace.
Zone Control
If your AVR supports additional zones, tap the current zone label (MZ, Z2, or Z3) to the left of the Power button. The selector expands to show the available zones, along with All On and All Off controls. Tap a zone to select it; the selector then closes.
Power, Volume, Input, and Quick Select control the selected zone. Switch back to MZ at any time to control your main listening area.
Multiple AVRs
You can add and control more than one AVR. To add another receiver, open Settings and select Add AVR....
When you have multiple AVRs, swipe left or right across the receiver name at the top of the controller to switch between them. The controls then apply to that AVR.
Discovery and Setup
On first launch, tap Find My AVR to search your local network for compatible receivers. Select your receiver to add it to myAVR.
To add another receiver later, open Settings and select Add AVR....
Troubleshooting
If myAVR cannot find or connect to your receiver, check these items first:
- Make sure your iPhone and AVR are on the same local network. They must be able to communicate with each other. Some guest networks, VLANs, or router settings isolate devices and can prevent discovery.
- Allow local network access. myAVR needs permission to find receivers on your network. If you previously denied it, open Settings → App Permissions... in myAVR and enable local network access for the app.
- Set Network Control to Always On. On supported Denon and Marantz receivers, the AVR's Network Control setting should be set to Always On so myAVR can reach the receiver while it is in standby and power it on.
- Confirm that the AVR is connected to your network. Check the receiver's network settings and make sure it has a valid IP address.
- A static or reserved IP address is recommended, but not required. If your AVR's IP address changes, myAVR can search the network again and find it. Keeping the same IP address allows myAVR to connect immediately when the app opens instead of needing to search again. A static or reserved IP is typically configured in your router's DHCP settings, where you reserve the AVR's IP address for that device.
Menu names vary by receiver model, but the important things are that the AVR remains reachable on your local network and, for the quickest connection, keeps the same IP address.
Still Having Trouble?
Try closing and reopening myAVR, then restart the AVR and your router if necessary. If the receiver still cannot be found, verify the network settings above and open Settings and select Add AVR... to run discovery again.
If you still need help, email me at pjsapps@roadrunner.com.